Lithium ion cells have an operating
voltage range from 2.8v absolute minimum to 4.2V absolute maximum.
Charging the cells beyond 4.2V will cause them to heat up and ultimately
explode and ignite. Discharging a cell below 2.8v will damage the
cell rendering it useless. A protection circuit is essential to
keep the cells in balance and ensure proper charging and discharging.
These circuits are suitable for
hobbyists wanting to use Lithium polymer and Lithium ion cells.
We do not accept liability/responsibility for the safety of operation
of these circuits and suggest that when charging check the voltage
balance and heating of any cells frequently during the charging
period.
Single Cell (1S) Protection Circuit
3.7V 2A
Price R35 plus VAT = R40.25
Two Cell (2S) Protection Circuit
7.4V 3Amp
Price R55 Plus VAT = R63.25
Three Cell (3S) Protection Circuit
11.1V 6Ah
Price R100 plus VAT = R115
Three Cell (3S) Protection Circuit
Ideal for use in Drill Packs where high power output is required
11.1V 15Ah
Price R150 plus VAT = R172
Four Cell (4S) BMS
14.4V 8Amp
Price R100 Plus VAT = R115
Four Cell (4S) BMS
14.4V 12Amp
Suitable for Heavy duty packs for Drills
Price R150 Plus VAT = R172
5
Cell (5S) Protection Circuit 18V 15Amp
Suitable for Heavy duty packs
Price R300 Plus VAT = R345
6 Cell (6S) Protection Circuit
21.6V 12Amp
Suitable for Heavy duty packs
Price R300 Plus VAT = R345
Seven Cell (7S) Protection Circuit Nominal Battery
Voltage 26.6 full charge voltage
29.4V max current draw 15Amp
Suitable for Heavy duty packs for
Price R400 Plus VAT = R460
Copyright 1998
Akita Business Solutions , All Rights Reserved